TOHATSU

Sort By:  
The MFS75 design is built on our best-selling models the MFS40/50/60 and the MFS9.9/15/20. The legacy of our top performing and most reliable engines has been passed on, with a dynamic design and sophisticated details, to our all new MFS75 4-stroke outboard with industry-first innovative feature and characteristics.
$5,900.00
The MFS90 design is built on our best-selling models the MFS40/50/60 and the MFS9.9/15/20. The legacy of our top performing and most reliable engines has been passed on, with a dynamic design and sophisticated details, to our all new MFS90 4-stroke outboard with industry-first innovative feature and characteristics.
$6,150.00
The MFS115 design is built on our best-selling models the MFS40/50/60 and the MFS9.9/15/20. The legacy of our top performing and most reliable engines has been passed on, with a dynamic design and sophisticated details, to our all new MFS115 4-stroke outboard with industry-first innovative feature and characteristics.
$6,500.00
Looking for super power? Our largest, highest horsepower four stroke outboard, the BFT250D, brings a large displacement 3.6 liter V6. This narrow v6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.
$16,500.00
The Tohatsu in-line 4 cylinder 150 hp 4-stroke outboard is both sleek and powerful. The Variable Valve Timing and Lift Control system provides power where and when you need it, giving you excellent low end torque and top end speed. The result is a superior combination of power, torque and fuel efficiency.
$7,100.00
The 200 hp powerful four stroke, the BFT200D, brings a large displacement 3.6 liter V6. This narrow V6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.
$8,400.00
The 225 hp powerful four stroke, the BFT225D, brings a large displacement 3.6 liter V6. This narrow V6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.
$8,900.00
New Tohatsu Outboard Engine 4-Stroke MFS75A 75 HP - SALE !! (MFS75A)

Tohatsu 75 hp 4-Stroke Benefits

  • Dynamic design with sophisticated details Click Here
  • Exhilarating boating performance
  • Superior durability & optimized weight
  • Outstanding fuel economy from unique SOHC-4V design
  • Performance-inspired engine sound and the most quietest at idle
  • Fine-tuned ECU Programming
  • Available in long (20”) shaft lengths

High Performance and Easy Operation

  • 4-2-1 Performance Tuned Exhaust generates high torque to get you on plane quicker
  • Fine-tuned ECU provides the strong acceleration when needed
  • Electronic Fuel Injection
  • MicroComputer Programmed ignition system for quicker starts
  • High output 41 amp alternator
  • New and improved gear case with wider splash plate and anti-ventilation plate
  • Adjustable steering friction and trim tab for reducing steering effort
  • Power Trim and Tilt

Fundamentals for User Convenience and Reliability

  • Sheet Molding Compound (SMC) cowlings for durability
  • Anodized major aluminum components for greater corrosion resistance
  • Oil catch tray underneath the oil filter for cleaner oil filter changes
  • Easily accessible and removable fuel filter allows simple and quick water draining
  • More than 16 sacrificial anodes strategically placed throughout all major components
  • Through the prop exhaust for a quieter operation
  • Built-in freshwater flushing system for easy routine flushing
  • Variable idling speed control from 650 to 850 RPMs at 5-steps
  • A camshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Stainless steel water pump housing liner for outstanding durability

Warning & Protection

  • Low oil pressure warning (visual and audible)
  • Overheat warning (audible)
  • Start-in-gear protection for safer engine starting
  • Safety lanyard (an essential protection feature standard on all Tohatsu outboards)
  • Over-rev. limiter

FEATURES

4-2-1 Performance Tuned Exhaust

Isometric aggregated exhaust manifold "4-2-1 Performance Tuned Exhaust" maximizes torque and acceleration performance. This unique design is an industry-first and can only be found on Tohatsu Outboards. By engineering each exhaust passage to be equal in length, the merging of exhaust of each cylinder creates extra suction that helps pull the exhaust from the engine. This completely eliminates the possibility of exhaust interference and drastically improves the performance.

Outstanding Torque

From 4-2-1 Performance Tuned Exhaust, MFS75/90/100/115 have the highest torque that gets you on plane quicker and reach the top end speed faster than any other competitors.

**Data based on research done and collected by Tohatsu Engineering Department

Superior Durability & Optimized Weight

For high durability and weight reduction purposes, Tohatsu optimized each relatively heavy component such as cylinder head, exhaust manifold, engine base, oil pan, lower unit etc.. Also, special anodized process has been utilized on all major aluminum components for prolonged engine life.

Excellent Fuel Efficiency

MFS75/90/100/115 have a unique SOHC-4V design in its class where competitors are either SOHC-2V or DOHC-4V. Spark plugs are strategically placed in the center of the each combustion chamber for the most efficient combustion with optimal heat conduction which results in strong running and fuel efficiency.

Quietness

With the even-length Intake Manifold, 4-2-1 Performance Tuned Exhaust, and fine-tuned ECU, MFS75/90/100/115 provide exhilarating and performance-inspired engine sound. Also within the large capacity Idle Port, sounds reflect off each other to dampen the exhaust flow which contributes to the lowest sound at idle.

Maneuverability

With its fined-tuned ECU programming, MFS75/90/100/115 are designed to improve acceleration when needed in order to get the boat to plane quicker. When you throttle to wide open, the ECU recognizes it and ignites in all four cylinders at the same time. Simultaneously, the ECU optimizes and supplies adequate air & fuel which makes air/fuel mixture more suitable for rapid acceleration to generate higher torque. The higher the torque you have, the stronger the acceleration you will get, resulting in enhanced hole shots and thus, quicker planning.Also, Upper and Lower Mounts, and the Gear Case are optimized for direct steering response & maneuverability, and greater stability.

Multi-Function Tiller Handle with Grip-End PTT Switch

Multi-Function Tiller Handle is a great choice for commercial use. It has an ergonomically designed large Shift Lever located at the front and a longer Throttle Grip with a PTT (Power Trim & Tilt) switch located at the grip-end for easier operation and maneuverability. To balance different wind and current conditions, the Variable Idling System allows the user to select the best idling speed from 5 different RPM ranges by simply pressing the Key Switch.

TOCS 4.3 inch LCD Display (optional)

The TOCS (Tohatsu Onboard Communication System) 4.3 inch LCD Display connects to the CAN bus and communicates directly with the engine's ECU. Engine data, fault codes, and alarms are displayed on the LCD display.

SPECIFICATIONS :

Engine4 Cylinder
Output75 ps (55.2 kw)
Displacement1995 cc (121.6 cu.in.)
Bore x Stroke84 x 90 mm (3.31 x 3.54 in)
StartingElectric
Control TypeRemote Control or Tiller Handle
Gear ShiftForward - Neutral - Reverse
Gear Ratio2.08:1
Ignition SystemMicroComputer Programmed
Transom Height20", 25"
FuelUnleaded Gasoline (87 Octane) or higher
Oil TypeNMMA Certified FC-W® 4-stroke oil**
Oil Capacity4.2 L (1.11 gal.) w/filter
Weight*178 kg (392 lbs.)
Alternator Output12V, 492W, 41A
Max. RPM Range5,000 - 6,000
Electronic Fuel InjectionStandard
Start In Gear ProtectionStandard
Thermostat Controlled Cooling SystemStandard
Through-The-Prop ExhaustStandard
Overheat BuzzerStandard
Power Trim and TiltStandard
Oil Pressure WarningStandard
Variable Idle SpeedStandard
The MFS75 design is built on our best-selling models the MFS40/50/60 and the MFS9.9/15/20. The legacy of our top performing and most reliable engines has been passed on, with a dynamic design and sophisticated details, to our all new MFS75 4-stroke outboard with industry-first innovative feature and characteristics.
$5,900.00
New Tohatsu Outboard Engine MFS90A 90 HP - SALE !! (MFS90A)
The groundbreaking industry-first technology, 4-2-1 Performance Tuned Exhaust, provides incomparable torque throughout the RPM range. The higher torque you have the better hole shot, which translates to faster speeds. Higher torque also means less drag, which in turn means more boating options; it could be applied to any type of boat. From light to heavy, pleasure or commercial boats.

The synergy between the 4-2-1 Performance Tuned Exhaust and our fine-tuned ECU programming, MFS90 provides a strong acceleration when needed in order to get the boat on plane quicker and allowing you to reach the top end speed faster.

Equipped with standard features such as Variable Idle System allowing you to change the idle speed from 650 to 850 RPMs, a low gear ratio (2.08:1) giving you the increased low end torque your boat needs, a fresh-water Flushing System designed to make routine flushing easier, and a High Output 41 amp Alternator, the MFS90 provides the industry leading features you expect from Tohatsu.


Tohatsu 90 hp 4-Stroke Benefits

  • Dynamic design with sophisticated details Click Here
  • Exhilarating boating performance
  • Superior durability & optimized weight
  • Outstanding fuel economy from unique SOHC-4V design
  • Performance-inspired engine sound and the most quietest at idle
  • Fine-tuned ECU Programming
  • Available in long (20”) shaft lengths

High Performance and Easy Operation

  • 4-2-1 Performance Tuned Exhaust generates high torque to get you on plane quicker
  • Fine-tuned ECU provides the strong acceleration when needed
  • Electronic Fuel Injection
  • MicroComputer Programmed ignition system for quicker starts
  • High output 41 amp alternator
  • New and improved gear case with wider splash plate and anti-ventilation plate
  • Adjustable steering friction and trim tab for reducing steering effort
  • Power Trim and Tilt

Fundamentals for User Convenience and Reliability

  • Sheet Molding Compound (SMC) cowlings for durability
  • Anodized major aluminum components for greater corrosion resistance
  • Oil catch tray underneath the oil filter for cleaner oil filter changes
  • Easily accessible and removable fuel filter allows simple and quick water draining
  • More than 16 sacrificial anodes strategically placed throughout all major components
  • Through the prop exhaust for a quieter operation
  • Built-in freshwater flushing system for easy routine flushing
  • Variable idling speed control from 650 to 850 RPMs at 5-steps
  • A camshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Stainless steel water pump housing liner for outstanding durability

Warning & Protection

  • Low oil pressure warning (visual and audible)
  • Overheat warning (audible)
  • Start-in-gear protection for safer engine starting
  • Safety lanyard (an essential protection feature standard on all Tohatsu outboards)
  • Over-rev. limiter

SPECS : 

SPECIFICATIONS

Engine4 Cylinder
Output90 ps (66.2 kw)
Displacement1995 cc (121.6 cu.in.)
Bore x Stroke84 x 90 mm (3.31 x 3.54 in)
StartingElectric
Control TypeRemote Control or Tiller Handle
Gear ShiftForward - Neutral - Reverse
Gear Ratio2.08:1
Ignition SystemMicroComputer Programmed
Transom Height20"
FuelUnleaded Gasoline (87 Octane) or higher
Oil TypeNMMA Certified FC-W® 4-stroke oil**
Oil Capacity4.2 L (1.11 gal.) w/filter
Weight*178 kg (392 lbs.)
Alternator Output12V, 492W, 41A
Max. RPM Range5,000 - 6,000
Electronic Fuel InjectionStandard
Start In Gear ProtectionStandard
Thermostat Controlled Cooling SystemStandard
Through-The-Prop ExhaustStandard
Overheat BuzzerStandard
Power Trim and TiltStandard
Oil Pressure WarningStandard
Variable Idle SpeedStandard
The MFS90 design is built on our best-selling models the MFS40/50/60 and the MFS9.9/15/20. The legacy of our top performing and most reliable engines has been passed on, with a dynamic design and sophisticated details, to our all new MFS90 4-stroke outboard with industry-first innovative feature and characteristics.
$6,150.00
New Tohatsu Outboard Engine MFS115A - 4 Stroke 115 HP - SALE !! (MFS115A)
The MFS115 design is built on our best-selling models the MFS40/50/60 and the MFS9.9/15/20. The legacy of our top performing and most reliable engines has been passed on, with a dynamic design and sophisticated details, to our all new MFS115 4-stroke outboard with industry-first innovative feature and characteristics.

The groundbreaking industry-first technology, 4-2-1 Performance Tuned Exhaust, provides incomparable torque throughout the RPM range. The higher torque you have the better hole shot, which translates to faster speeds. Higher torque also means less drag, which in turn means more boating options; it could be applied to any type of boat. From light to heavy, pleasure or commercial boats.

The synergy between the 4-2-1 Performance Tuned Exhaust and our fine-tuned ECU programming, MFS115 provides a strong acceleration when needed in order to get the boat on plane quicker and allowing you to reach the top end speed faster.

Equipped with standard features such as Variable Idle System allowing you to change the idle speed from 650 to 850 RPMs, a low gear ratio (2.08:1) giving you the increased low end torque your boat needs, a fresh-water Flushing System designed to make routine flushing easier, and a High Output 41 amp Alternator, the MFS115 provides the industry leading features you expect from Tohatsu.

Tohatsu 115 hp 4-Stroke Benefits

  • Dynamic design with sophisticated details Click Here
  • Exhilarating boating performance
  • Superior durability & optimized weight
  • Outstanding fuel economy from unique SOHC-4V design
  • Performance-inspired engine sound and the most quietest at idle
  • Fine-tuned ECU Programming
  • Available in long (20”) & ultra long (25”) shaft lengths

High Performance and Easy Operation

  • 4-2-1 Performance Tuned Exhaust generates high torque to get you on plane quicker
  • Fine-tuned ECU provides the strong acceleration when needed
  • Electronic Fuel Injection
  • MicroComputer Programmed ignition system for quicker starts
  • High output 41 amp alternator
  • New and improved gear case with wider splash plate and anti-ventilation plate
  • Adjustable steering friction and trim tab for reducing steering effort
  • Power Trim and Tilt

Fundamentals for User Convenience and Reliability

  • Sheet Molding Compound (SMC) cowlings for durability
  • Anodized major aluminum components for greater corrosion resistance
  • Oil catch tray underneath the oil filter for cleaner oil filter changes
  • Easily accessible and removable fuel filter allows simple and quick water draining
  • More than 16 sacrificial anodes strategically placed throughout all major components
  • Through the prop exhaust for a quieter operation
  • Built-in freshwater flushing system for easy routine flushing
  • Variable idling speed control from 650 to 850 RPMs at 5-steps
  • A camshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Stainless steel water pump housing liner for outstanding durability

Warning & Protection

  • Low oil pressure warning (visual and audible)
  • Overheat warning (audible)
  • Start-in-gear protection for safer engine starting
  • Safety lanyard (an essential protection feature standard on all Tohatsu outboards)
  • Over-rev. limiter


FEATURES :

4-2-1 Performance Tuned Exhaust

Isometric aggregated exhaust manifold "4-2-1 Performance Tuned Exhaust" maximizes torque and acceleration performance. This unique design is an industry-first and can only be found on Tohatsu Outboards. By engineering each exhaust passage to be equal in length, the merging of exhaust of each cylinder creates extra suction that helps pull the exhaust from the engine. This completely eliminates the possibility of exhaust interference and drastically improves the performance.

Outstanding Torque

From 4-2-1 Performance Tuned Exhaust, MFS75/90/100/115 have the highest torque that gets you on plane quicker and reach the top end speed faster than any other competitors.

Superior Durability & Optimized Weight

For high durability and weight reduction purposes, Tohatsu optimized each relatively heavy component such as cylinder head, exhaust manifold, engine base, oil pan, lower unit etc.. Also, special anodized process has been utilized on all major aluminum components for prolonged engine life.

Excellent Fuel Efficiency

MFS75/90/100/115 have a unique SOHC-4V design in its class where competitors are either SOHC-2V or DOHC-4V. Spark plugs are strategically placed in the center of the each combustion chamber for the most efficient combustion with optimal heat conduction which results in strong running and fuel efficiency.

Quietness

With the even-length Intake Manifold, 4-2-1 Performance Tuned Exhaust, and fine-tuned ECU, MFS75/90/100/115 provide exhilarating and performance-inspired engine sound. Also within the large capacity Idle Port, sounds reflect off each other to dampen the exhaust flow which contributes to the lowest sound at idle.

Maneuverability

With its fined-tuned ECU programming, MFS75/90/100/115 are designed to improve acceleration when needed in order to get the boat to plane quicker. When you throttle to wide open, the ECU recognizes it and ignites in all four cylinders at the same time. Simultaneously, the ECU optimizes and supplies adequate air & fuel which makes air/fuel mixture more suitable for rapid acceleration to generate higher torque. The higher the torque you have, the stronger the acceleration you will get, resulting in enhanced hole shots and thus, quicker planning. Also, Upper and Lower Mounts, and the Gear Case are optimized for direct steering response & maneuverability, and greater stability.

Multi-Function Tiller Handle with Grip-End PTT Switch

Multi-Function Tiller Handle is a great choice for commercial use. It has an ergonomically designed large Shift Lever located at the front and a longer Throttle Grip with a PTT (Power Trim & Tilt) switch located at the grip-end for easier operation and maneuverability. To balance different wind and current conditions, the Variable Idling System allows the user to select the best idling speed from 5 different RPM ranges by simply pressing the Key Switch.

TOCS 4.3 inch LCD Display (optional)

The TOCS (Tohatsu Onboard Communication System) 4.3 inch LCD Display connects to the CAN bus and communicates directly with the engine's ECU. Engine data, fault codes, and alarms are displayed on the LCD display.

SPECS :

Engine4 Cylinder
Output115 ps (84.6 kw)
Displacement1995 cc (121.6 cu.in.)
Bore x Stroke84 x 90 mm (3.31 x 3.54 in)
StartingElectric
Control TypeRemote Control or Tiller Handle
Gear ShiftForward - Neutral - Reverse
Gear Ratio2.08:1
Ignition SystemMicroComputer Programmed
Transom Height20", 25"
FuelUnleaded Gasoline (87 Octane) or higher
Oil TypeNMMA Certified FC-W® 4-stroke oil**
Oil Capacity4.2 L (1.11 gal.) w/filter
Weight*178 kg (392 lbs.)
Alternator Output12V, 492W, 41A
Max. RPM Range5,000 - 6,000
Electronic Fuel InjectionStandard
Start In Gear ProtectionStandard
Thermostat Controlled Cooling SystemStandard
Through-The-Prop ExhaustStandard
Overheat BuzzerStandard
Power Trim and TiltStandard
Oil Pressure WarningStandard
Variable Idle SpeedStandard

 

The MFS115 design is built on our best-selling models the MFS40/50/60 and the MFS9.9/15/20. The legacy of our top performing and most reliable engines has been passed on, with a dynamic design and sophisticated details, to our all new MFS115 4-stroke outboard with industry-first innovative feature and characteristics.
$6,500.00
New Tohatsu Outboard Engine BFT250D - 4 Stroke 250 HP - SALE !! (BFT250D)
The new BFT250D provides a broader torque range and smoother power throughout the engine’s operating range. With an innovated exterior, the improvement of corrosion resistance and water intrusion makes BFT250D the right choice.

Tohatsu 250 hp 4-Stroke Benefits

  • High output alternator that produces 90 amp alternator with 60 charging amps
  • Large Displacement 3.6 Litre V6
  • Available in 25" shaft lengths. Standard and Counter rotation
  • Double sealed multi-layered paint process to help protect against corrosion
  • Semi direct air intake system
  • Enhanced sealing system by adopting three new large locks

4-Stroke Technology

  • Lean burn control for better fuel economy at cruising speeds
  • Maximum Acceleration System helps to deliver an exceptional hole shot
  • Variable valve timing and lift control
  • 3-Way Cooling System to help protect against overheating
  • Heavy duty 5" diameter gear case built to withstand extreme conditions
  • Non-linear rubber mounts provide smoother operation at all engine speeds
  • A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Optimized Fuel Injection delivers the precise amount of fuel/air to each cylinder

Fundamentals for User Convenience and Reliability

  • Through the prop exhaust for a quieter ride
  • Built-in freshwater flushing system for easy routine flushing
  • Separate dual air intake cowling design to help keep your engine's critical components cool
  • Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
  • Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS

Warning & Protection

  • Low oil pressure warning
  • Overheat warning
  • Low battery voltage warning
  • Water in fuel warning
  • Start-in-gear protection
  • Over-rev. limiter

SPECS :

Engine (No. of Cylinder)6 Cylinder SOHC, 60 degrees V6, 24 Valve
Output250 ps (186.4 kw)
Displacement3,583 cc (218.6 cu.in.)
Bore x Stroke89 x 96 mm (3.5 x 3.8 in)
StartingElectric
Control TypeRemote Control
Gear ShiftForward - Neutral - Reverse
Gear Ratio2.0:1 (12:24)
Ignition SystemMicroComputer Programmed
Propeller Selection Range15" - 27"
Transom Height25"
FuelUnleaded Gasoline (87 Octane) or higher
Oil TypeNMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity7.8L (2.1 US Gal.) w/filter
Weight*284 kg (626 lbs.)
Alternator Output12V, 1080W, 90A
Max. RPM Range5,300 - 6,300
Programmed Fuel InjectionStandard
Start In Gear ProtectionStandard
Thermostat Controlled Cooling SystemStandard
Through-The-Prop ExhaustStandard
Overheat BuzzerStandard
Power Trim and TiltStandard
Oil Pressure WarningStandard
Variable Valve Timing & Lift ControlStandard
Looking for super power? Our largest, highest horsepower four stroke outboard, the BFT250D, brings a large displacement 3.6 liter V6. This narrow v6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.
$16,500.00
New Tohatsu Outboard Engine BFT150A - 4 Stroke 150 HP - SALE !! (BFT150A)
The 150hp also features Optimized Fuel Injection, which delivers the precise amount of fuel/air to each cylinder. This gives you easy starting and an instant throttle response. Plus, the 3-way cooling system provides added protection from over heating. You’ll enjoy worry-free boating with the Tohatsu four stroke 150 hp outboard.

Tohatsu 150 hp 4-Stroke Benefits

  • High output alternator produces 30 amps of power at 1,000 rpms and 40 amps at 2,000+ rpms
  • Available in 20” & 25” shaft lengths, standard or counter rotation
  • In-line 4 cylinder for excellent performance and sleek design
  • Double sealed multi-layered paint process to help protect against corrosion
  • Ultra-low 3 star CARB emission approved

4-Stroke Technology

  • Dual stage induction for improved performance
  • Lean burn control for better fuel economy at cruising speeds
  • Variable valve timing and lift control
  • 3-way cooling system to help protect against overheating
  • Non-linear rubber mounts provide smoother operation at all engine speeds
  • A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Optimized fuel injection delivers the precise amount of fuel/air to each cylinder

Fundamentals for User Convenience and Reliability

  • Through the prop exhaust for a quieter ride
  • Built-in freshwater flushing system for easy routine flushing
  • Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
  • Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS

Warning & Protection

  • Low oil pressure warning
  • Overheat warning
  • Low battery voltage warning
  • Start-in-gear protection
  • Over-rev. limiter

FEATURES :

Maximum Acceleration System

The Maximum Acceleration System improves acceleration and performance at low speeds. When there is a quick movement of the throttle, the system is activated advancing the ignition timing curve quickly. This offers improved holeshot and quicker planing performance.

Fuel-Efficient Cruise System

Fuel economy is optimized at cruising speeds by allowing combustion at the best air/fuel mixture. This offers up to 30% less fuel consumption than the competition.

Variable Valve Timing and Lift Control

system provides power where and when you need it. This gives you a broader, flatter torque curve and smooth power delivery throughout the engine's operating range. The result is a superior combination of power, torque and fuel efficiency.

Multi-port Programmed Fuel Injection [PGM-FI]® - Powerful Performance

Programmed Fuel Injection delivers the precise amount of fuel/air response with superior fuel efficiency.

*PGM-FI® is a registered trademark of Honda Motor Co., Ltd.

Dual Stage Induction - Breathing easier improves performance

BFT 225 has a unique variable intake system which optimizes air flow to match the engine's speed. The results are maximized combustion efficiency, increased torque, and superb fuel economy.

4-front Corrosion Protection System

A patented, "Double Sealed" multi-layered paint process, sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.

SPECIFICATIONS :

Engine4 Cylinder DOHC 16 Valves
Output150 ps (119.9 kw)
Displacement2,354 cc (143.6 cu.in.)
Bore x Stroke87 x 99 mm (3.4 x 3.9 in)
StartingElectric
Control TypeRemote Control
Gear ShiftForward - Neutral - Reverse
Gear Ratio2.14:1 (14:30)
Ignition SystemMicroComputer Programmed
Propeller Selection Range13" - 25"
Transom Height20", 25"
FuelUnleaded Gasoline (87 Octane) or higher
Oil TypeNMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity6.7L (1.8 US Gal.) w/filter
Weight*217 kg (478 lbs.)
Alternator Output12V, 660W, 55A
Max. RPM Range5,000 - 6,000
Programmed Fuel InjectionStandard
Start In Gear ProtectionStandard
Thermostat Controlled Cooling SystemStandard
Through-The-Prop ExhaustStandard
Overheat BuzzerStandard
Power Trim and TiltStandard
Oil Pressure WarningStandard
Variable Valve Timing & Lift ControlStandard




 

The Tohatsu in-line 4 cylinder 150 hp 4-stroke outboard is both sleek and powerful. The Variable Valve Timing and Lift Control system provides power where and when you need it, giving you excellent low end torque and top end speed. The result is a superior combination of power, torque and fuel efficiency.
$7,100.00
New Tohatsu Outboard Engine BFT200D - 4 Stroke 200HP - SALE !! (BFT200D)
The new BFT200D provides a broader torque range and smoother power throughout the engine’s operating range. With an innovated exterior, the improvement of corrosion resistance and water intrusion makes BFT200D the right choice.

FEATURES :

Tohatsu 200 hp 4-Stroke Benefits

  • High output alternator that produces 90 amp alternator with 60 charging amps
  • Large Displacement 3.6 Litre V6
  • Available in 20" & 25" shaft lengths. Standard and Counter rotation
  • Double sealed multi-layered paint process to help protect against corrosion
  • Semi direct air intake system
  • Enhanced sealing system by adopting three new large locks

4-Stroke Technology

  • Lean burn control for better fuel economy at cruising speeds
  • Maximum Acceleration System helps to deliver an exceptional hole shot
  • Variable valve timing and lift control
  • 3-Way Cooling System to help protect against overheating
  • Heavy duty 5" diameter gear case built to withstand extreme conditions
  • Non-linear rubber mounts provide smoother operation at all engine speeds
  • A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Optimized Fuel Injection delivers the precise amount of fuel/air to each cylinder

Fundamentals for User Convenience and Reliability

  • Through the prop exhaust for a quieter ride
  • Built-in freshwater flushing system for easy routine flushing
  • Separate dual air intake cowling design to help keep your engine's critical components cool
  • Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
  • Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS

Warning & Protection

  • Low oil pressure warning
  • Overheat warning
  • Low battery voltage warning
  • Water in fuel warning
  • Start-in-gear protection
  • Over-rev. limiter

SPECIFICATIONS

Engine6 Cylinder SOHC, 60 degrees V6, 24 Valve
Output200 ps (147.1 kw)
Displacement3,583 cc (218.6 cu.in.)
Bore x Stroke89 x 96 mm (3.5 x 3.8 in)
StartingElectric
Control TypeRemote Control
Gear ShiftForward - Neutral - Reverse
Gear Ratio2.0:1 (12:24)
Ignition SystemMicroComputer Programmed
Propeller Selection Range15" - 27"
Transom Height20", 25"
FuelUnleaded Gasoline (87 Octane) or higher
Oil TypeNMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity7.8L (2.1 US Gal.) w/filter
Weight*279 kg (615 lbs.)
Alternator Output12V, 1080W, 90A
Max. RPM Range5,000 - 6,000
Programmed Fuel InjectionStandard
Start In Gear ProtectionStandard
Thermostat Controlled Cooling SystemStandard
Through-The-Prop ExhaustStandard
Overheat BuzzerStandard
Power Trim and TiltStandard
Oil Pressure WarningStandard
Variable Valve Timing & Lift ControlStandard


The 200 hp powerful four stroke, the BFT200D, brings a large displacement 3.6 liter V6. This narrow V6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.
$8,400.00
New Tohatsu Outboard Engine BFT225D - 4 Stroke 225 HP - SALE !! (BFT225D)
The new BFT225D provides a broader torque range and smoother power throughout the engine’s operating range. With an innovated exterior, the improvement of corrosion resistance and water intrusion makes BFT225D the right choice.

Tohatsu 225 hp 4-Stroke Benefits

  • High output alternator that produces 90 amp alternator with 60 charging amps
  • Large Displacement 3.6 Litre V6
  • Available in 25" shaft lengths. Standard and Counter rotation
  • Double sealed multi-layered paint process to help protect against corrosion
  • Semi direct air intake system
  • Enhanced sealing system by adopting three new large locks

4-Stroke Technology

  • Lean burn control for better fuel economy at cruising speeds
  • Maximum Acceleration System helps to deliver an exceptional hole shot
  • Variable valve timing and lift control
  • 3-Way Cooling System to help protect against overheating
  • Heavy duty 5" diameter gear case built to withstand extreme conditions
  • Non-linear rubber mounts provide smoother operation at all engine speeds
  • A crankshaft-driven trochoid oil pump ensures long-term durability of critical engine components
  • Optimized Fuel Injection delivers the precise amount of fuel/air to each cylinder

Fundamentals for User Convenience and Reliability

  • Through the prop exhaust for a quieter ride
  • Built-in freshwater flushing system for easy routine flushing
  • Separate dual air intake cowling design to help keep your engine's critical components cool
  • Sealed starter motor that is inverted into a sealed chamber to help protect vital components against elements
  • Electronic Control Module protocols allow engine data to be interfaced with on-board systems and systems displays, such as SONAR or GPS

Warning & Protection

  • Low oil pressure warning
  • Overheat warning
  • Low battery voltage warning
  • Water in fuel warning
  • Start-in-gear protection
  • Over-rev. limiter


SPECIFICATIONS :

Engine (No. of Cylinder)6 Cylinder SOHC, 60 degrees V6, 24 Valve
Output225 ps (165.5 kw)
Displacement3,583 cc (218.6 cu.in.)
Bore x Stroke89 x 96 mm (3.5 x 3.8 in)
StartingElectric
Control TypeRemote Control
Gear ShiftForward - Neutral - Reverse
Gear Ratio2.0:1 (12:24)
Ignition SystemMicroComputer Programmed
Propeller Selection Range15" - 27"
Transom Height20", 25"
FuelUnleaded Gasoline (87 Octane) or higher
Oil TypeNMMA Certified FC-W® 4-stroke oil** SAE 10W-30 (SF, SG, SH, SJ)
Oil Capacity7.8L (2.1 US Gal.) w/filter
Weight*286 kg (631 lbs.)
Alternator Output12V, 1080W, 90A
Max. RPM Range5,000 - 6,000
Programmed Fuel InjectionStandard
Start In Gear ProtectionStandard
Thermostat Controlled Cooling SystemStandard
Through-The-Prop ExhaustStandard
Overheat BuzzerStandard
Power Trim and TiltStandard
Oil Pressure WarningStandard
Variable Valve Timing & Lift ControlStandard
The 225 hp powerful four stroke, the BFT225D, brings a large displacement 3.6 liter V6. This narrow V6 design offers top performance and durability, as well as great fuel economy. The high output alternator provides a 90 amp alternator with 60 charging amps.
$8,900.00
Per Page      1 - 7 of 7
  • 1